build plywood sail boat – Lolligagger 3 / 3
Author: admin
Building a plywood sail boat. 12 foot long day-sailer. Part 3 of 3 – Launching….trying different sails / masts.
Duration : 0:5:42
read comments (7)So You Want To Build a Sail Boat Trailer Part I
Author: admin
Ever wonder if you could or should build your own sail boat trailer? See what the HideAways learned from the experience of converting a power boat trailer from a marine salvage yard to use with a Compac 23 sailboat this edition of The Adventures of The HideAways.
Duration : 0:10:1
Build small plywood sail boat – Lolligagger 1 /3
Author: admin
Build plywood sail boat during Christmas school holidays. Part 1 of 3 – hull & below deck construction,
Duration : 0:9:41
Currach’s from Co Kerry – www.dinglecurrach.com
Author: admin
A film about Monty O’Leary, Currach builder on the Maharees, Dingle peninsula, Co. Kerry.
Monty is from a long tradition of Currach builders and makes
Full size and Model currachs.
Website: www.dinglecurrach.com
Duration : 0:3:45
South Coast 22 Project Sailboat Vid #1
Author: admin
Be sure and check out the next video in the series http://www.youtube.com/watch?v=avxJIv4_US8
This is my South Coast 22 project boat.
In this video I pretty much just go over some of the things that I entend to redo and improve on the boat.
If you are looking for information on project sailboats or sailboat maintenance, then make your way over to
http://www.sailingandsuch.com
where you will find links to hundreds of different project boat websites and lots if information on different maintenance issues that come along with sailboats.
Duration : 0:6:22
Raider Sailing/Rowing boat
Author: admin
A new computer designed and cut sailing/rowing boat.
Duration : 0:0:56
55 Seconds is All it Takes to Deploy 4 Emergency Boats With Their Attached Means Of Propulsion, and which are 2 Folded Paddles of the Same Material – - – This Short Video introduces Multi-stages of Deployment, and Shown On Land And Water. – and while made from only one single substrate.
EMail from Bob: – - – - – - – - – - – - – - – - – - – - – - –
– - –
I have studied boat design and owned many boats
through my 67 years, often one or two boats bought
and sold annually. Yours is the most original that I ever
have seen. The setup and instant pop-out are
amazing.
As a fisherman who loves to squeeze into smaller less
available lakes, your boat looks neat. However, it
probably is not practical for fishing. But I can dream.
Do you sell plans or the complete boat? Might be fun
to have one.
Bob in Michigan
In reply to Bob; thank you for your positive comment.
Have you seen all of the videos ?
See this one in Particular:
http://www.youtube.com/watch?v=3k-0Vwyut9U
My two sons and I have stood up within one of our over
40 or so prototypes and have rocked it violently from
side to side without capsizing the craft. That version
has an interior cabin space of 26 inches by 10 feet.
My wife and I have gone out on a lake many times in
one craft with a battery, trolling motor, fishing poles and
an ice chest. We have also clamped two boats
together with my wife and daughter in one craft, and
myself and the motor and battery and other items
being within the second and attached craft.
There are now suppliers of corrugated plastic who
carry the material in 5 foot by 14 foot lengths, and so
should produce a 38 inch wide by 12 foot craft.
Serious dedicated fishing ? – Maybe not . . . but for
spur of moment fishing . . . oh yeah, its good.
Eventually within the major box type stores, you may see pallets of our folded no-parts water crafts with their attached means of propulsion being the folding oars. We are open to capital investment to fund the proper course.
Thank you again for your positive comment,
and congratulations on your ability to see potential.
– The Pioneerpaddlers -
Not All Versions Are Shown.
Several more in the works on paper. – emergencypaddler@gmail.com
- for info, contact:
http://www.maximumcq.com
Duration : 0:2:31
X-Torm yacht design D-Tank
Author: admin
The basis of the project is a search for extreme sensations at sea and the application of this language of adventure sports to nautical endeavors, resulting in a 12-m length, 4.5m beam mono-hull sailboat, ready for navigating storms and enjoying extreme sea conditions. A project carried out by members of D-Tank and Rücker Ibérica, in collaboration with the Elisava Superior School of Design and the Nautical Salon of Barcelona.
Duration : 0:2:24
mizukovideo – ERYD Yacht Design
Author: admin
www.eryd.com
design: Emanuele Rossi Yacht Design
sound: SoundPressure
video: mizukovideo
Duration : 0:7:4
Boat Building; Wooden International Moth Scow
Author: admin
Chris H. of New York builds an International Moth scow to the Bunyip design by R Hilton of Australia.
These hulls weighed between 21-28 kg when finished.
Music by Michael Rogers; “Sauropod Shuffle” from the complilation CD “Sound of Light”
Duration : 0:3:55