The New project: The boat part 5. 15′ Glousterman Dory
Author: admin
A Nutcase survivalist production.
The New project: The boat part 5.
15′ Glousterman Ultralight Dory, a Stitch and Glue DIY Boat.
Just remember: measure twice! Cut once!
Duration : 0:10:6
read comments (9)Build small plywood sail boat – Lolligagger 1 /3
Author: admin
Build plywood sail boat during Christmas school holidays. Part 1 of 3 – hull & below deck construction,
Duration : 0:9:41
The New project: The boat part 4. 15′ Glousterman Dory
Author: admin
A Nutcase survivalist production.
The New project: The boat part 4.
15′ Glousterman Ultralight Dory, a Stitch and Glue DIY Boat.
This is the fourth part in my series on the family project, The Boat.
we h ave already made, do to our haste and inferior boat building skillz, made two mistakes, One, we let the patch slip, two we used to big of a patch, we should have cut the 1/4 sheet in half. Oh well, Live and learn. From what we can see it will not affect the boat in the end. I am sure this is not the last mistake we will make, however the next one we build will be much better.
Duration : 0:8:42
Currach’s from Co Kerry – www.dinglecurrach.com
Author: admin
A film about Monty O’Leary, Currach builder on the Maharees, Dingle peninsula, Co. Kerry.
Monty is from a long tradition of Currach builders and makes
Full size and Model currachs.
Website: www.dinglecurrach.com
Duration : 0:3:45
Building the Jani J-Design
Author: admin
The hull is designed using cardboard patterns, by guess and by eye, based on a Pacific power dory.
Duration : 0:9:55
Boat Building; Wooden International Moth Scow
Author: admin
Chris H. of New York builds an International Moth scow to the Bunyip design by R Hilton of Australia.
These hulls weighed between 21-28 kg when finished.
Music by Michael Rogers; “Sauropod Shuffle” from the complilation CD “Sound of Light”
Duration : 0:3:55
RAID41 home made wooden boat by Michael Storer
Author: admin
Sailing the home built wooden boat – the RAID 41 by Michael Storer Wooden Boat Plans.
The boat was not a complete success. It was too hard to get back aboard after a capsize, but it is as nice to sail as the Goat Island Skiff, goes smoothly and quickly upwind and planes away downwind.
For other boats that work more consistently see http://www.storerboatplans.com
Duration : 0:3:56
Jon boat decking project 3/4 plywood test
Author: admin
Jon boat decking project 3/4 plywood test
14ft x 38 inch bottom
Duration : 0:0:34
Jon boat decking project 3/8 plywood test
Author: admin
Jon boat decking project 3/8 plywood test
14ft x 38 inch bottom
Duration : 0:0:43
Boat building, applying plywood skin to frames
Author: admin
applying plywood skin to frames
web site
www.what-a-boat-this.com
Duration : 0:0:59