Weekend project. 1981 Searay 265. Next step is electric motor.
Duration : 0:3:22
read comments (25)
The SeaVee 390 Series is designed as a hardcore center console fishing boat with an array of family friendly boat options, including the Luxury Boat Edition.
Duration : 0:1:42
SeaVee 320 custom center console or cuddy cabin comes with eiter inboard or outboard motors and is the perfect fishing boat to perform offshore.
Duration : 0:1:6
Cooking Crab in a Drift Boat
Author: admin
Ron Wakita of Reliable Guide and Charters had a plan: Let’s go catch some Dungeness Crab in the Douglas Channel, cook them on the drift boat while we fish for Chinook (King)Salmon in the Kitimat River. GREAT plan, I said. I cut the video after the crab feast. We did hook into two Chinook but lost them both. We did land a Pink.
If you wish to learn more about fishing in my area SUBSCRIBE to my WEEKLY FISHING REPORT via e-mail. SIGN UP on my website http://www.noelgyger.ca/subscribers_f…
I also I book guided fishing trips for whom I think are the very best fishing guides in British Columbia. I know all of them very well. They do a fabulous job and pride themselves on service and professionalism.
IF YOU ARE EVER INTERESTRED TO BOOK A TRIP WITH ONE OF THEM PLEASE CONTACT ME ANYTIME. My contact info is: Phone 250-635-2568 E-mail: noel@noelgyger.ca Website: www.noelgyger.ca. Hope to hear from you soon. Take care. Best regards, Noel Gyger
Duration : 0:3:52
My homemade fishing boat…
Author: admin
was drunk and wanted a boat.. so instead of building a tool shed.. i used my wood to build a fishing boat.. took about 3 weeks to build …. 14 feet long, 5 feet wide at top.. 4 foot wide floor.. 5×5 casting deck in front and 5×3 in rear…
Duration : 0:3:37
Ip 24 Island plastics Fishing boat restoration re build
Author: admin
Ip 24 x 10.6 restoration. boat rebuilding
Duration : 0:6:37
An old broken and worn out radio control speed boat is sunk in the lake instead of being put out for the trash man. An onboard camera was put on to record the sinking.It was attached with velcro and tethered with a fishing line in order to recover the camera. A good pull ripped the velcro apart once the boat had sunk.
I used my popsicle stick rc tugboat to pull it out to the site where it would be sunk. Please see my other videos for a video of that boat with an onboard camera. Once at the site, the duct tape that covered the holes that were drilled in the hull was pulled off and it began to sink. Only the tug made it back to shore.
All music from www.freeplaymusic.com
Duration : 0:5:36
Hyde Unique Modular Design – Hyde Drift Boats
Author: admin
Visit us online at www.HydeOutdoors.com and design your drift boat today. Hyde Drift Boats hand laid fiberglass and aluminum boats are the highest quality on the market. Hyde also leads the drift boat fishing industry in manufacturing drift boat trailers, oars, storage boxes, rowing seats, and anchor systems.
Duration : 0:2:16
Wood Watercraft
Author: admin
Wood Watercraft custom boat design. Drift boats designed for Michigan’s inland rivers and lakes. Fly fishing design in mind, a gret drift boat for fly fishing rivers.
Duration : 0:2:48
55 Seconds is All it Takes to Deploy 4 Emergency Boats With Their Attached Means Of Propulsion, and which are 2 Folded Paddles of the Same Material – - – This Short Video introduces Multi-stages of Deployment, and Shown On Land And Water. – and while made from only one single substrate.
EMail from Bob: – - – - – - – - – - – - – - – - – - – - – - –
– - –
I have studied boat design and owned many boats
through my 67 years, often one or two boats bought
and sold annually. Yours is the most original that I ever
have seen. The setup and instant pop-out are
amazing.
As a fisherman who loves to squeeze into smaller less
available lakes, your boat looks neat. However, it
probably is not practical for fishing. But I can dream.
Do you sell plans or the complete boat? Might be fun
to have one.
Bob in Michigan
In reply to Bob; thank you for your positive comment.
Have you seen all of the videos ?
See this one in Particular:
http://www.youtube.com/watch?v=3k-0Vwyut9U
My two sons and I have stood up within one of our over
40 or so prototypes and have rocked it violently from
side to side without capsizing the craft. That version
has an interior cabin space of 26 inches by 10 feet.
My wife and I have gone out on a lake many times in
one craft with a battery, trolling motor, fishing poles and
an ice chest. We have also clamped two boats
together with my wife and daughter in one craft, and
myself and the motor and battery and other items
being within the second and attached craft.
There are now suppliers of corrugated plastic who
carry the material in 5 foot by 14 foot lengths, and so
should produce a 38 inch wide by 12 foot craft.
Serious dedicated fishing ? – Maybe not . . . but for
spur of moment fishing . . . oh yeah, its good.
Eventually within the major box type stores, you may see pallets of our folded no-parts water crafts with their attached means of propulsion being the folding oars. We are open to capital investment to fund the proper course.
Thank you again for your positive comment,
and congratulations on your ability to see potential.
– The Pioneerpaddlers -
Not All Versions Are Shown.
Several more in the works on paper. – emergencypaddler@gmail.com
- for info, contact:
http://www.maximumcq.com
Duration : 0:2:31